fbpx Skip to content

Four Post Alignment Hoist- Powerrex SL6000A 6 Ton 6000kg

Quick Overview

> 6000KG capacity.
> suitable for cars, light commercials, vans, and trucks.
> Includes two secondary jacks/jacking beams.
> Slip plates and turntable cutouts for wheel alignments
> Made in Korea

> Adjustable Front flush mount turntable recesses.
> Lockable rear slip plates
> 5,700mm platform length provides wheel alignment for extended wheelbase vehicles
> Individual control switch on each rolling jack
> Control panel push button and cable remote control
> 600mm Wide and 5700mm long runways to accommodate small and large vehicles
> 6000kg 6 Ton max lift weight
> 2 x 3000 kg Electro-Hydraulic Jacking beams included
> Premium quality lifts 100% manufactured in Korea

SL-6000A is a premium quality four post wheel alignment lift supplied with two centre jacking beams as standard to give a wheel free operation for when you need to replace all four tyres or carry out a tyre rotation.

Featuring a 3 button control panel for up, lock and down and a 6 button remote control with up and down control for the lift and each jacking beam.

Each jacking beam also has electrical switches on each side to operate them while in place under the car. The jacking beams are powered by the main hydraulic pump of the lift, no need to run pneumatic air lines to the jacking beams.

The lift platform has a low profile of only 280mm from the ground and is fitted with 1200mm long drive on ramps.

This means the lift can handle low riding cars as well as light commercial vehicles.

The double lock safety system is automatically activated as the lift is raised and includes a cable brakeage emergency locking system should there be failure.

These locks are electrically operated by simply pushing a button on the control panel to unlock and lower the lift, and no pneumatic supply is required.

The adjustable locking ladders in each post enable simple levelling of the lift and ensure all 4 corners of the lift are locked and level.

Operation is a simple single button to go up and lock button to rest the lift onto the locks. Lower button raises the lift off the locks and lowers the lift.

Specifications
Max Height MAIN 1,900mm
Min Height MAIN 280mm
Overall Width
– 3615mm (including pump station)
Drive-Thru Clearance
– 900mm
Length
– 7335mm including ramps
Motor
– 3Ph 415v 3HP

Available for special order only. Please allow 16 weeks lead time.

Weight2000 kg
Dimensions500 × 60 × 100 cm

Reviews

There are no reviews yet.

Be the first to review “Four Post Alignment Hoist- Powerrex SL6000A 6 Ton 6000kg”

Your email address will not be published. Required fields are marked *

Before you goSign up so you don't miss out

Subscribe to receive updates on new arrivals, special offers and workshop safety information!